Skip to content
Collingwood Lock ExpertsRequest a visit
Open 24/7(249) 486-8066Call now
Person kneeling beside an open black safe with a spirit level on top and loose bolts and a wrench on the concrete floor. — Safe Installation & Servicing, Cedar Point

Plan ahead High security · Cedar Point

Safe Installation & Servicing in Cedar Point

The office is moving three blocks over, and the old commercial safe that has sat bolted to the concrete for fifteen years now needs to come out, travel across town, and go back down just as solidly.

Call now · open 24/7(249) 486-8066

Request a visit

In plain words

Plenty of visits under this service involve a safe that has been sitting in a back office for years rather than a new one arriving in a box. The locksmith opens the bolt-work, cleans and lubricates the moving parts, tests the lock through several full cycles, and checks whether the anchoring underneath is still solid or was never done at all. Batteries in an electronic lock are swapped before they fail rather than after, and any stiffness in the handle or bolts is traced to rust, dried grease, or a worn part and corrected on the spot.

Sound familiar?

A community group counts the weekend's raffle and bake-sale cash on a kitchen table, then carries it home in a tote bag until the bank opens Monday, because there has never been anywhere safer to leave it.

How the visit goes

Safe Installation & Servicing · Cedar Point

How the visit goes

Technician holding a small key fob at a bench with a key-cutting machine, loose keys, and a motorcycle and scooter behind. — Cedar Point
  1. 1

    What an insurer or head office has specified

    Many businesses are told by an insurance policy, a franchise agreement, or a head office what rating a safe on the premises needs to meet before cash or stock is fully covered. The locksmith asks whether any such requirement exists before recommending a unit, because installing a lower-rated safe than a policy calls for can leave a real gap between what the business assumes is protected and what actually is. Where no requirement has been given, the conversation turns to how much is realistically kept on site overnight.

  2. 2

    Setting it level and in its final position

    Once the safe is on site, it is moved into position with a hand truck, dolly, or rigging suited to its weight, protecting door frames and flooring along the way rather than dragging it across a room. It is set level using shims where the floor is slightly uneven, since a safe that sits even a little off level can bind its own bolt-work over time. The final position also leaves enough clearance for the door to swing fully open and for anchor bolts to be reached from underneath or behind.

  3. 3

    A schedule for the next visit

    A safe does not announce when it needs attention the way a squeaky hinge does, so it helps to put a rough date on the calendar rather than waiting for a sign of trouble. Checking the bolt-work, the batteries, and the door seal every year or two catches small stiffness or corrosion long before it becomes a stuck lock. Businesses with heavier daily use, such as a till safe opened many times a shift, generally benefit from a shorter interval between checks than a document safe opened rarely.

In the van

  • Hammer drill and masonry bits
  • Nine-volt backup battery
  • Mounting plate
  • Bolt-work lubricant
  • Moving dolly and floor protection

What affects the quote

  1. 1

    New installation versus servicing an existing unit

    Fitting a brand-new safe involves positioning, anchoring, and lock setup from scratch, while servicing an existing one focuses on bolt-work, lock testing, and confirming or adding anchoring, generally a shorter list of tasks.

  2. 2

    Battery and accessory needs

    An electronic lock needs a battery of the correct type on hand, and a fire-rated unit benefits from desiccant supplied at installation, both small additions to the visit.

  3. 3

    Condition of an existing safe

    Rust on hinges, stiff or grinding bolt-work, a lock that hesitates, or anchoring that was never done all add work beyond a routine check on a servicing visit.

Same fees day, night or weekend.

Have it ready

Before you call · 0 / 3

(249) 486-8066

Safe Installation & Servicing: questions

Advice · (249) 486-8066

Can an existing safe be bolted down after years of sitting loose?

In most cases, yes. The floor or wall behind it is checked the same way as for a new installation, anchor points on the safe itself are located, and hardware suited to that surface is fitted without needing to move the unit far from where it already sits. An older safe occasionally has anchor holes that were never used, which makes this part of the job simpler than starting from scratch.

Do you deliver and move the safe, or do I need to arrange that?

Delivery and the final move into position are part of the service, using equipment suited to the safe's actual weight rather than improvising with furniture dollies or straps meant for lighter loads. The route in is measured ahead of time so doorways, stairs, and tight turns are accounted for before the unit arrives, which avoids a surprise at the one hallway that turns out to be too narrow.

Will anchoring damage my flooring?

Anchoring leaves small holes at the anchor points, sized to the bolts being used, and on a finished floor these sit under the safe itself where they are never seen again. On tile, the risk of cracking nearby tiles is real enough that an alternative fastening point or a different spot in the room is often chosen instead of drilling straight through the tile itself.

Simcoe, Ontario

Cedar Point information

Town
Cedar Point, Simcoe, Ontario
In business
25 years
Hours
Open 24/7 · nights, weekends and holidays, same fees
Visits
On-site assessment preferred. Request a visit or call.

What the census means at the door

47%

Homes of every age. About 47% of homes in Tiny were built in 1980 or earlier, according to the 2021 Census.

Where housing ages are mixed, some homes have never had a deadbolt and others have two. The visit starts with a look at what is already there, and the recommendation might be adding a lock on one house and simply tuning it on the next.

97%

Mostly houses. Single-detached houses make up about 97% of homes in Tiny (2021 Census).

Families in houses hand keys to children, cleaners, dog walkers and neighbours. A locksmith can set up a keypad on the side door for the household and keep the front door on a conventional key, so access matches how the family actually comes and goes.

Source: Statistics Canada, 2021 Census of Population

Open Cedar Point in Google Maps

Open 24/7

Request a visit

The office is moving three blocks over, and the old commercial safe that has sat bolted to the concrete for fifteen years now needs to come out, travel across town, and go back down just as solidly.

Call now · open 24/7(249) 486-8066
  • On-site assessment preferred
  • Same fees day, night or weekend
  • 25 years in business